Welcome, Guest
Username: Password: Remember me

TOPIC: EGT Cylinder and CHT 1960 Cessna 182C Question

EGT Cylinder and CHT 1960 Cessna 182C Question 2 months 4 weeks ago #980

Hi guys!! Thank you for Answers!



GOOD FLIGHTS B)
The administrator has disabled public write access.

EGT Cylinder and CHT 1960 Cessna 182C Question 2 months 4 weeks ago #979

In most legacy 182 the factory single CHT probe is in cylinder #3, but usually the hottest cylinder is #5, behind the oil cooler. The factory single EGT probe is installed about 4” after the joint of the exhaust pipes of cylinders 1, 3 and 5.
The administrator has disabled public write access.

EGT Cylinder and CHT 1960 Cessna 182C Question 3 months 4 days ago #977

Not an A&P but my single egt is placed on the passenger side middle cylinder. Cant remember about the single CHT sorry.

Adam
The administrator has disabled public write access.

EGT Cylinder and CHT 1960 Cessna 182C Question 3 months 4 days ago #976

Hi boys! Good morning .I have the following questions:

EGT : Where is it better to place it? on the number cylinder 1,2,3,4,5,6 flute? or in the general flute that goes to the muffler


CHT , Cylinder number?

in another of our planes we have an analyzer for each cylinder, in this we are still going to have to handle with a sensor only in a cylinder and we want to know which is the best one to monitor.


:blink: :cheer:
The administrator has disabled public write access.
Time to create page: 0.268 seconds